Welcome to Akshata Enterprise

Other Products
	AGNIGARD-MAX
	TEXACOAT-NW
	THICKNOL

Speciality/Functional Finishing Agents

AGNIGARD-MAX : (An highly concentrated durable flame retardant back coating. It is predominantly for upholstery fabrics of cellulosic, synthetic or blends)

Application :
AGNIGARD-MAX is applied by knife over air, knife over roller or profile systems. This product imparts a soft handle finish.

Based on phosphonates Key Properties :

Non-Hygroscopic
Excellent Rub fastness
Does not reduce tear or tensile strength
Improved abrasion resistance and colour loss on abrasion
Does not discolour upholstery fabrics
Ideal for prints, jacquards and plain dyed fabrics
Does not require alkali wash off
AOX free
Does not contain Antimony Compound, eco friendly.
Does not emit toxic fumes. Keeping environment free from polluting gases

Appearance Consistency :	Viscous white Liquid ( at 20oC) Thick Syrupy Liquid
pH :	7.5 ±1.5 : 1% soln. : Typically
Odour :	Product has virtually no odour.
Viscosity (at 20^oC) :	Medium – high ~12000 CPS ± 3000
Compatibility :	Compatible with large number of finishing agents, however, addition of any chemicals should be checked ‘in-house’.
Thermal Stability :	Product is stable upto 30oC, it is stable down to 0oC. Product may show slight sedimentation which will re-disperse.

Application : AGNIGARD-MAX is a back-coat application flame retardant. Recommended usage levels are between 15 to 40% dry o.w.g. depending upon the GSM and quality of substrate to be treated.

AGNIGARD-MAX will require a cure of between 130 to 170oC .
AGNIGARD-MAX will meet the requirements of BS5852 Ignition sources 0 and 1 ( cigarette & match) after BS5651 cleansing and wetting procedures and F.R.Tests like:
BS - 5867
BS - 5852
FAR – 25.853
NFPA – 701
I.S. 15061
RDSO-C-9503

Shelf Life : Product is stable for upto 12 months minimum if stored in recommended conditions.
Storage Conditions : Product should be stored between 10 and 25oC .

Warranty Clause:
The product incorporated and sold is without warranty expressed or implied, including warranty of Merchantability and fitness for use of this material and upon condition that purchaser shall make their own test to determine the suitability and quality of the product for their particular purpose. The user assumes all risks of use and handling, whether or not in accordance with any statement of the supplier. Supplier’s liability of any, for any action arising out of the material being supplied, shall be limited to only replacement of material.